BKMKS - RSTRT LTX EN BRT YEL
- MSDS: BKMKS
- Manufacturer: VALSPAR CORP
- Product Name: RSTRT LTX EN BRT YEL
- National Stock Number: 8010-00B220039
Product Identification
Product ID:RSTRT LTX EN BRT YEL
MSDS Date:06/06/1990
FSC:8010
NIIN:00B220039
MSDS Number: BKMKS
Responsible Party
MINNEAPOLIS, MN 55415-1211
US
Emergency Phone: 800-228-5635 24 HR. EMERGENCY
Info Phone: 612-332-7371
Cage: 06758
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: NONE SPECIFIED BY MANUFACTURER.
CHRONIC:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN OR
RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR 15 MIN. SKIN: WASH WITH SOAP AND
WATER. INHALATION: REMOVE PERSON FROM EXPOSURE AREA. IF BREATHING
HAS STOPPED. USE MOUTH-TO-MOUTH RESUSCITATION AND GET MEDICAL
ATTENTION. I NGESTION: DO NOT INDUCE VOMITING. GET MEDICAL
ATTENTION IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:205F,96C
Lower Limits:3.00
Upper Limits:13.00
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS MUST WEAR SELF CONTAINED
BREATHING APPARATUS OR AIR MASKS. CONTAINERS EXPOSED TO FIRE SHOULD
BE KEPT COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE SPILLS WITH INERT
ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED. DO NOT STORE
ABOVE 120F. EMPTY CONTAINERS MAY CONTAIN PRODUCT RESIDUE. DO NOT
CUT, PUNCTURE OR WELD ON OR NEAR CONTAINERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED RESPIRATOR
(NIOSH/MSHA APPROVED) DURING AND AFTER APPLICATION UNLESS AIR
MONITORING VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS.
Ventilation:MECHANICAL (GENERAL)
Protective Gloves:IMPERVIOUS NATURAL RUBBER GLOVES.
Eye Protection:SAFETY GOGGLES WITH OPTIONAL FACE SHIELD
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT BY USING
CLEAN WORK CLOTHING, INCLUDING A HAT.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
WASHROOM FACILITIES. DO NOT WEAR CONTAMINATED CLOTHING OR FOOTWEAR.
Supplemental Safety and Health
DO NOT HANDLE UNTIL MANUFACTURES SAFETY PRECAUTIONS HAVE BEEN READ AND
UNDERSTOOD. PROVIDE ADEQUATE VENTILATION OR RESPIRATORY PROTECTION
TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR FLAME CUTTI NG
COATED SURFACES. DO NOT STORE OR USENEAR HEAT, SPARKS, OR FLAMES.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:24.0 @ 77F
Vapor Density:7.4
Spec Gravity:1.18
Evaporation Rate & Reference:.4
Solubility in Water:YES
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT
Percent Volatiles by Volume:68.64
Stability
Stability Indicator/Materials to Avoid:YES
WATER-REACTIVE MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE, METAL
OXIDES.
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH ALL
APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.